抢庄三张

Committed to building China's PE pipe industry brand

Excellent quality and low price one-stop service

Nationally recognized enterprises with national gas qualification and provincial water supply qualification in the industry
pe water pipe 15933737708 Consulting Hotline: 15933737708
Hebei Tengyuan Plastic Products Co., Ltd. reserves the right to interpret all content on this website
Back to top
Case details
15933737708 Consulting Hotline: 15933737708

You are here: Home > Products > Product Details > Functions of PE Pipe Welder

Product Details

Case details

Function of PE pipe welding machine

1. 可以实现一致、可靠、可重复的操作。 PE pipe welding machine can achieve consistent, reliable and repeatable operation.

2. PE管焊接机 焊接过程各阶段的主要参数,并判断每一焊口的状况。 The system will monitor and record the main parameters of each stage of the welding process of the PE pipe welding machine , and judge the condition of each weld.

3. The PE pipe welding machine has a data retrieval storage device, which downloads the stored data to an electronic device (computer or printer) through an interface, and has a storage capacity of at least 500 welding joint parameters. These parameters include welder model, ambient temperature, welding date, welding time, welder code, engineering code, weld number, type of pipe being welded (raw material level, nominal outside diameter, wall thickness or SDR value), drag force (peak (Pulling force and dynamic pulling force), hot plate temperature, edge forming pressure, heat absorption time, switching time, welding pressure, cooling time, etc.

4. 自动铣切管道端面。 PE pipe welding machine can automatically cut the pipe end face. Automatically check whether the pipe is securely clamped.

5. 自动测量拖动拉力(峰值拖动拉力和动态拖动拉力)以及自动补偿拖动力。 PE pipe welding machine can automatically measure drag force (peak drag force and dynamic drag force) and automatically compensate drag force.

6. 自动监测热板温度。 PE pipe welding machine can automatically monitor the hot plate temperature. If the hot plate temperature is not within the set operating temperature range, the welder should not be able to perform welding.

7. All stages (pressurization, edge formation, pressure reduction, heat absorption, plate extraction, pressurization, pressure holding, and cooling) are automatically performed after the hot plate is inserted between the pipes to be welded. The drawing time of the fully automatic hot-melt butt welding machine with a maximum weldable range ≤315mm should not be greater than 4 seconds; the drawing time of the fully automatic hot-melt butt welding machine with a maximum weldable range ≥400mm should not be greater than 8 seconds.

8. The microprocessor uses a closed-loop control system. When the welding parameters suddenly occur during the welding process, the welding machine can automatically interrupt the welding and give an alarm to the welder. (4) The electric fusion welding machine shall have a data retrieval storage device, which downloads the stored data to an electronic device (computer or printer) through an interface, with a storage capacity of at least 250 welding joint parameters. The electric fusion welding machine should have automatic input of working parameters and automatic compensation of ambient temperature. Automatic input methods can be barcodes, identification resistors, magnetic cards or micro-control chips.

PE管焊接机为任何人所用,为任何人用好。 Only with high efficiency, good repeatability and easy operation, can PE pipe welding machine be used by anyone and good for anyone.

Case details

a